Posts

Showing posts with the label Springback Compensation

Springback in Sheet Metal Bending: Why Angles Don’t Match and How to Compensate

Image
 A customer once returned a batch of brackets because the angles measured 92 degrees instead of 90. The machine was fine. The sheet had simply done what sheet metal does. At Mahavir Enterprise, we deal with this regularly, and the first thing we explain to new clients is that springback is not a defect. It is a property of the metal, and it can be planned for. Metal Wants to Straighten Itself Press a strip of spring steel against a table edge and it flicks back as soon as you let go. Mild sheet does the same thing quietly. By the time the punch is back up, you have usually lost a degree or two of the angle you formed. The inner skin of the bend is squeezed and the outer skin stretched, and only part of that stays put. The rest unwinds. Harder metal unwinds more.  What We See on the Floor Plain mild steel is the easy one. It usually opens by one or two degrees. Stainless is a different story, and 3 to 5 degrees is not unusual on a thicker sheet. Aluminium swings both ways depen...